C P - 3 4 2 CONNER NO MORE PRODUCED Native| Translation ------+-----+-----+----- Form 3.5"/HH Cylinders | 977| 805| Capacity form/unform 42/ MB Heads | 5| 4| Seek time / track 29.0/ ms Sector/track | 17| 26| Controller IDE / AT Precompensation Cache/Buffer KB Landing Zone Data transfer rate 1.000 MB/S int Bytes/Sector 512 MB/S ext Recording method RLL operating | non-operating -------------+-------------- Supply voltage Temperature *C | Power: sleep W Humidity % | standby W Altitude km | idle W Shock g | seek W Rotation RPM read/write W Acoustic dBA spin-up W ECC Bit MTBF h 20000 Warranty Month Lift/Lock/Park YES Certificates ********************************************************************** J U M P E R S ********************************************************************** CONNER CP342 JUMPER SETTING Jumper Setting ============== Master E6-E7 Closed Single E5-E7 Closed Slave E6 Closed ********************************************************************** G E N E R A L ********************************************************************** CONNER CP-342 + WD Jumper Setting ============== J8 +5-3-1+ +-----+ +-----+ Master |X * *| |* X *| |* X X| E6-E7 Closed |X * *| |* X *| |* X X|WD DRIVE +6-4-2+ +-----+ +-----+ Single Master Slave Slave E5-E7 Closed Slave E6 Closed Installation with a WD93024A/95024A/93028AD/93048AD! WD drive must be configured as SLAVE! Conner drive must be configured as MASTER!