D 3 7 1 5 NEC
Native| Translation
------+-----+-----+-----
Form 3.5"/SLIMLINE Cylinders | 524| |
Capacity form/unform 270/ MB Heads | 16| |
Seek time / track 12.0/ 3.0 ms Sector/track | 63| |
Controller IDE / ATA2 FAST/ENHA Precompensation
Cache/Buffer 256 KB SEGMENTED Landing Zone
Data transfer rate 6.000 MB/S int Bytes/Sector 512
13.300 MB/S ext PIO1
Recording method operating | non-operating
-------------+--------------
Supply voltage 5/12 V Temperature *C |
Power: sleep W Humidity % |
standby W Altitude km |
idle W Shock g |
seek 5.0 W Rotation RPM 4500
read/write W Acoustic dBA
spin-up W ECC Bit
MTBF h 100000
Warranty Month
Lift/Lock/Park YES Certificates
**********************************************************************
L A Y O U T
**********************************************************************
NEC D3715/D3717 JUMPER SETTING
+---------------------------------------------------------+
| |XX
| SW1 |XX
| +++++ |XX PCAT
| +++++ |XX I/F
| +-+ |XX
| J4| | |XX
| +-+ |XX
| RESERVED|XX
| |XX
| |XX
| |XX
| |XX
|+-+J8 |XX
|+-+LED |
| |XX
| |XX
+---------------------------------------------------------+
**********************************************************************
J U M P E R S
**********************************************************************
NEC D3715/D3717 JUMPER SETTING
Jumper Setting
==============
SW1 |\
+---------------+ON --------+ \
|+-+ +-+ +-+ +-+| --------+ /
||x| |x| |x| |x|| |/
|+-+ +-+ +-+ +-+| AT IF Connector Side
+-1---2---3---4-+OFF
| | | +-------------- ALWAYS SETS OFF
| | +------------------ ALWAYS SETS OFF
| +---------------------- CSEL (Cable Select)
| ON - effective
| OFF - ineffective
+-------------------------- M/S
ON - MASTER
OFF - SLAVE
J4 Connector
------------
All pins Factory use!
DON'T USE!
J8 LED Connector
----------------
2 1
+--------+
| | | |
+--+--+--+
++++-++-++
+++-++-+
| +---- Anode Side
+-------- Cathode Side