D K 3 2 8 H - 4 3 HITACHI Native| Translation ------+-----+-----+----- Form 3.5"/HH Cylinders | | | Capacity form/unform 4370/ MB Heads 10| | | Seek time / track 9.0/ 1.0 ms Sector/track | | | Controller SCSI3 SI/FA Precompensation Cache/Buffer 512 KB Landing Zone Data transfer rate 9.000 MB/S int Bytes/Sector 512 20.000 MB/S ext SYNC Recording method PRML 8/9 operating | non-operating -------------+-------------- Supply voltage 5/12 V Temperature *C 5 50 | -40 60 Power: sleep W Humidity % 8 80 | 8 90 standby W Altitude km 2.500| 12.000 idle W Shock g 5 | 60 seek 10.0 W Rotation RPM 7198 read/write W Acoustic dBA 45 spin-up W ECC Bit MTBF h 1000000 Warranty Month Lift/Lock/Park YES Certificates ********************************************************************** L A Y O U T ********************************************************************** HITACHI DK328H-43 JUMPER SETTING +---------------------------------------------------------+ | |XX | |XXI | |XXN | |XXT | |XXE | 2++++++ |XXR | 1++++++ |XXF | JP2 +-+ JP3 |XXA | | | |XXC | | | |XXE | 2+-+1 |XX | |XX | |XX | | | |XX Power | |XX +---------------------------------------------------------+ +---------------------------------------------------------+ | ++++++1 | | J6 ++++++2 | | | | | | | | | | | | | | | | | | | | | | | | | | | | | +---------------------------------------------------------+ ********************************************************************** J U M P E R S ********************************************************************** HITACHI DK328H-43 JUMPER SETTING Jumper Setting ============== NOTE The DK328H jumpers other than listed above (BLACK jumper) are installed by the manufacturer and must not be replaced by the user! Never remove any of the BLACK factory set jumpers. These jumpers are unique to each drive. All jumpers should be set with power off. JP2 ---- 2--+--+--+--+--+ | | |XX|XX|XX| XX = FACTORY SET 1--+--+--+--+--+ | + Write Protect +--- Delayed Spindle Start JP3 --- +--+ Disable SCSI Bus Parity +--+ Disable Spindle Auto Start +--+ Enable Terminator +--+ Term. Power from SCSI Bus +--+ Term. Power from Drive 2--1 JP6 --- 1---+---+---+---+---+ |LED|XXX|ID2|ID1|ID0| 2---+---+---+---+---+ +----------+-----------------------+ | SCSI ID | Jumpers | | | ID2 | ID1 | ID0 | +----------+-------+-------+-------+ | 0 | OPEN | OPEN | OPEN | +----------+-------+-------+-------+ | 1 | OPEN | OPEN | CLOSED| +----------+-------+-------+-------+ | 2 | OPEN | CLOSED| OPEN | +----------+-------+-------+-------+ | 3 | OPEN | CLOSED| CLOSED| +----------+-------+-------+-------+ | 4 | CLOSED| OPEN | OPEN | +----------+-------+-------+-------+ | 5 | CLOSED| OPEN | CLOSED| +----------+-------+-------+-------+ | 6 | CLOSED| CLOSED| OPEN | +----------+-------+-------+-------+ | 7 | CLOSED| CLOSED| CLOSED| default +----------+-------+-------+-------+ ********************************************************************** I N S T A L L ********************************************************************** -ANY DIREC. Notes on installation ===================== Installation direction ---------------------- horizontally vertically +-----------------+ +--+ +--+ | | | +-----+ +-----+ | | | | | | | | | +-+-----------------+-+ | | | | | | +---------------------+ | | | | | | | | | | | | | | | | | | +---------------------+ | +-----+ +-----+ | +-+-----------------+-+ +--+ +--+ | | | | +-----------------+ The drive will operate in all axis (6 directions).