EASTERN ELECTRONICS COMPANY

IDC-747

Data bus: 16-bit, ISA

Size: Full-length, full-height card

Hard drives supported: Four IDE (AT) Interface drives

Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS

Function

Location

34-pin data cable connector-floppy drives

CN1

40-pin IDE (AT) Interface connector-drives 1 & 2

CN2

40-pin IDE (AT) Interface connector-drives 3 & 4

CN3

4-pin connector-drive active LED

CN4

USER CONFIGURABLE SETTINGS

Function

Location

Setting

»

Normal I/O decoder speed

JP1

pins 1 & 2 closed

 

Fast I/O decoder speed

JP1

pins 2 & 3 closed

»

Hard drive port address is 1F0-1F7h, 3F6-3F7h

JP3/jumper 4

closed

 

Hard drive port address is 170-177h, 376-377h

JP3/jumper 4

open

»

Floppy drive enabled

JP3/jumper 5

closed

 

Floppy drive disabled

JP3/jumper 5

open

»

Factory configured - do not alter

JP3/jumper 6

closed

»

Factory configured - do not alter

JP3/jumper 7

N/A

BIOS ADDRESS

Address

JP3/jumper 1

JP3/jumper 2

JP3/jumper 3

»

D800h

open

closed

closed

 

D000h

open

open

closed

 

C800h

open

closed

open

 

Disabled

open

open

open

INTERRUPT REQUEST

IRQ

JP2/jumper 1

JP2/jumper 2

JP2/jumper 3

JP2/jumper 4

 

IRQ5

closed

open

open

open

 

IRQ12

open

closed

open

open

»

IRQ14

open

open

closed

open

 

IRQ15

open

open

open

closed

MISCELLANEOUS TECHNICAL NOTES

This card's cache feature supports 256KB, 1MB, or 4MB SIMM's; making the maximum cache capacity 16MB. The same size SIMM must be installed in each socket of a bank and Bank 0 must be filled for proper operation of the controller.