PCI64-Q3D Audio v1.60 - updated on 13 April 99
==============================================

Important Notes:
================
1. It is recommended to remove the old drivers prior to the installation of
   the new drivers.

2. The drivers can be install/reinstall anytime by running the AZTSETUP.EXE
   
PCI64Win95-160	16,436 KB	7:32PM	10/8/99 Version 1.60 For Windows 9x
PCI64WinNT-160	16,233 KB	7:34PM	10/8/99 Version 1.60 For Windows NT4.0


Known Issues:
=============
Win95/Win98
===========
1. If there is no sound after the installation of the sound card, please
   run AZTSETUP.EXE that can be found on the root directory of the CD.

2. During the installation of drivers, if being prompted to reboot the
   system, it is recommended to do so.  The restarting is caused by 
   resource conflict in the system.

3. PCMOut is currently used to control the overall gain for the digital input.

4. There is no PC Speaker connector available on the sound card.  This panel
   will be removed in later stage.

5. On certain motherboard, there might be conflict between the DOS drivers
   and EMM386.EXE.  Therefore it is recommended to remark the EMM386.EXE
   from the AUTOEXEC.BAT.

6. When shut down to MS-DOS from Win95/Win98, if the message "Could 
   not find master environment set blaster variable, type "SET BLASTER = 
   A220 I5 D1 T2 P330" or add the line to your AUTOEXEC.BAT".  Please ignore
   the error.

7. If the interrupt of the sound card is being shared with other device, some
   games may not work properly.
   To resolve this, there are two options:
   (i) Reserve IRQ5 for the sound card through the BIOS.  Please refer to the 
       motherboard manual for details.
   (ii) Remove the sound card from current PCI slot and plug it to another 
        available PCI slot.

8. When running SETUP for some games, they give error message "You cannot
   use an IRQ greater than 9".  Please ignore the error by pressing ESC key
   and continue the game.  WaveTSR will relocate the IRQ and the game will
   run normally.

9. On some system, if after installation of drivers, an error message
   complaining the sound card is not running on PCI bus 0 and the DOS
   drivers cannot be loaded, please disable the PnP OS option from the
   BIOS.

Windows NT 4.0
==============
1. The user needs to manually install the drivers.  Steps:
   - In the Control Panel, double click on the Multimedia icon.
   - Click Devices.
   - Select Audio Devices option and click the Add button.
   - Select Unlisted or Updated Driver option.  Click OK to continue.
   - Browse to the D:\DRIVERS\NT40 and select the language preferred.
   - Select the PCI Audio option and click OK.
   - Repeat the steps above to install the PCI Audio Gameport.
   - Restart system when prompted to do so.
   
2. PCMOut can be used to control the MIDI and wave output.

3. There is no PC Speaker connector available on the sound card.  This panel
   will be removed in later stage.






WHQL Logo's drivers
====================
L-WIN9X1 EXE     2,200,376  03-03-99  8:53p PCI 64-Q3D WIN 95 Drivers only (4.05.2014) Disk 1/3
L-WIN9X2 EXE     1,921,775  03-03-99  8:54p PCI 64-Q3D WIN 95 Drivers only (4.05.2014) Disk 2/3
L-WIN9X3 EXE     4,526,967  03-03-99  8:55p PCI 64-Q3D WIN 95 Drivers only (4.05.2014) Disk 3/3

L-WINNT1 EXE     2,169,819  03-03-99  8:56p PCI 64-Q3D WIN NT 4.0 Drivers Version 4.05.3003 Disk 1/3
L-WINNT4 EXE     1,680,596  03-03-99  8:57p PCI 64-Q3D WIN NT 4.0 Drivers Version 4.05.3003 Disk 2/3
L-WINNT3 EXE     4,526,967  03-03-99  8:58p PCI 64-Q3D WIN NT 4.0 Drivers Version 4.05.3003 Disk 3/3