3Com Corporation
NDIS 2.01 Drivers Installation Notes


Microsoft LAN Manager Versions 2.0, 2.1, and 2.2
------------------------------------------------

 The EtherDisk diskette contains a subdirectory 
 structure and files that make it an OEM import 
 disk for the LAN Manager installer.  Use the 
 import function of the LAN Manager installer 
 to capture the NDIS driver from the EtherDisk diskette.  
 Be sure to save the new configuration before exiting the
 installer.

DOS Installation with LAN Manager 2.2
-------------------------------------

 The following describes the procedure for 
 importing the driver during installation of 
 LAN Manager 2.2 for DOS.

 1. Begin the MS-DOS LAN Manager installation by 
    inserting the MS-DOS Setup diskette and 
    typing: 
    
    A:SETUP

 2. After reading the Microsoft Drivers 1 diskette, 
    a window is displayed showing available network 
    adapter drivers.  In this window choose the
    following function:

    Select Other Driver         (Alt-D)

 3. When prompted to insert your network driver 
    diskette, insert the EtherDisk diskette.

 4. After the driver is imported from the Etherdisk diskette, 
    a box will be displayed showing the driver.  
    Select the Fast Etherlink/EtherLink III Bus Master Family driver.

 5. Continue with the remainder of the installation 
    by next selecting a protocol to use with the Fast Etherlink/ 
    EtherLink III Bus Master Family driver.

=========================================================



(%VER NDIS - MS LAN Manager v3.4c)